Posted on Leave a comment

JH Audio JH16

Device:MiEMi 8mm
Measurement Mic:Audix TM1
Soundcard:Focusrite Sapphire 2i2
Measurement Platform:Smaart v8 DI
Other info:Measured by SLS Audio
Icon

JH Audio JH16 26.48 KB 2 downloads

JH 16 Frequency/ Phase response for use with SMAART measurement software …
Posted on Leave a comment

JH Angie Bass set to max

Device:MiEMi 8mm
Measurement Mic:Audix TM1
Soundcard:Focusrite Sapphire 2i2
Measurement Platform:Smaart v8 DI
Other info:Measured by SLS Audio
Icon

JH Audio JH16v2 max bass 26.24 KB 2 downloads

JH 16v2 Frequency/ Phase response for use with SMAART measurement software …
Posted on Leave a comment

JH16v2 Bass set to min

Device:MiEMi 8mm
Measurement Mic:Audix TM1
Soundcard:Focusrite Sapphire 2i2
Measurement Platform:Smaart v8 DI
Other info:Measured by SLS Audio
Icon

JH Audio JH16v2 min bass 26.39 KB 2 downloads

JH 16v2 Frequency/ Phase response for use with SMAART measurement software …
Posted on Leave a comment

Ultimate Ears UE5 Pro

Device:MiEMi 8mm
Measurement Mic:Audix TM1
Soundcard:Focusrite Sapphire 2i2
Measurement Platform:Smaart v8 DI
Other info:Measured by SLS Audio
Icon

Ultimate Ears UE5 Pro 26.33 KB 2 downloads

UE5 Pro Frequency/ Phase response for use with SMAART measurement software …
Posted on Leave a comment

Ultimate Ears UE 11 Pro

Device:MiEMi 8mm
Measurement Mic:Audix TM1
Soundcard:Focusrite Sapphire 2i2
Measurement Platform:Smaart v8 DI
Other info:Measured by SLS Audio
Icon

Ultimate Ears UE11 Pro 26.45 KB 3 downloads

UE11Pro Frequency/ Phase response for use with SMAART measurement software …
Posted on Leave a comment

JH Audio JH11

Device:MiEMi 8mm
Measurement Mic:Audix TM1
Soundcard:Focusrite Sapphire 2i2
Measurement Platform:Smaart v8 DI
Other info:Measured by SLS Audio
Icon

JH Audio JH11 26.33 KB 4 downloads

JH 11 Frequency/ Phase response for use with SMAART measurement software …
Posted on 1 Comment

How To Test In Ear Monitors With MiEMi™

For this guide I’m assuming you have a functional measurement system & sound card set up. Make sure you’ve cleaned any goo or wax out of your IEM’s as this will affect your measurements.

For those that prefer to watch a video demonstration

First thing to do is sit MiEMi™on top of your measurement mic and make sure it’s inserted all the way. Then push the end of the rubber coupler back in on itself. Push the IEM into the rubber coupler as far as it will go (see photos). It’s important to push the IEM’s in as far as you can into the coupler. MiEMi has a 12mm long canal giving a half wave cancellation at around 13Khz just like an IEC711 ear simulator, so increasing the distance between the IEM & MiEMi™ changes the effective length of the canal.

You’re now ready to measure with MiEMi™, start your analyser software and you should now get a trace. I tend to use averaging of about 1 second to minimise handling and background noise interference and smoothing of around 1/3rd or 1/6th of an octave. I typically find I have to zoom out on the vertical axis (- button on SMAART) to get a decent view of the whole trace. If all goes well you should end up with something like the the image below. We recommend the following analyser settings for best results, set averaging to around 1 second and smoothing to 1/3 or 1 octave.

MiEMi™ Trace from a set of JH16v2’s

I tend to store a L&R trace for each band member’s IEM’s at the start of a tour and check them after cleaning each day. I generally clean them with antiseptic wipes & an in ear vacuum cleaner. By Measuring them I’m 100% sure they working when I give them to the band and can quickly identify any inconsistencies.

Isn’t it about time you started checking your in ears? Visit the store and buy yours now

Still unsure if MiEMi™ can help you? Contact us via this form

Happy Measuring!